Create Templates for Setting Parameters

Before batch configuring parameters for devices, you should create a template. After creating a template, you can batch apply it to other devices.

Make sure you have activated devices and linked channels to NVR and DVR (if any). See Batch Activate Devices and Assign IP Addresses for Them and Batch Link Channels to NVR and DVR for details.

  1. In the Parameter Template field of Configuration page, select an NVR and tap > Parameter Configuration to enter the remote configuration page.
  2. On the remote configuration page, set parameters for the device.
  3. Tap Save as Template on the top right.
  4. Select parameters you want to save in the template and tap Next.
  5. Enter the template name and tap Complete to save the template.
  6. Optional: Add a new template based on device with configured parameters.
    1. In the Parameter Template field of Configuration page, tap Show All to enter the Manage Template page.
    2. Tap Create Template.
    3. Select a device of which the parameters will be saved as the new template, and tap Next.
    4. Select the parameters you want to save in the template, and tap OK.
    5. Enter template name and tap Complete to create the template.
    6. Optional: On the Manage Template page, select a template and swipe left, and tap Delete to delete a template.