Batch Set Parameters for Devices

To configure devices with high efficiency, you can batch apply parameters in an existing template to devices.

Make sure you have created at least one template for setting parameters. See Create Templates for Setting Parameters for details.

  1. Enter the Select Template page.

    • Select a device and tap .

    • Select a device and tap > Set Parameters by Template.

    Note:

    Before setting parameters for an NVR or DVR, you can tap > Format to format the disk of the selected device. Batch formatting is not supported.

  2. Select a template and tap Apply Parameters.

    The application process and application results will be displayed.

  3. Optional: Perform the following operations.
    Option Description

    Add Device to Site

    Tap Complete on the top right and add devices to Sites. See Add Device for details.

    Manage Template

    Tap Show All to enter the Manage Template page. You can add new template or delete template. See Create Templates for Setting Parameters for details.

    Edit NVR Name

    Select an NVR, and tap > Rename to edit name of NVR.

    Synchronize Phone Time to Device

    On the top of Parameter Configuration page, tap Synchronize to synchronize the mobile phone time to all devices.