Configure AX PRO and AX HYBIRD PRO
On the Mobile Client, you can conduct remote operations on AX PRO and AX HYBIRD PRO device, such as starting walk test, setting DST (Daylight Saving Time), switching language, and upgrading device.
Tap on an AX PRO
/
AX HYBIRD PRO device in a Site to enter its details page. On the
device details page, tap 
to enter the settings page to remotely
configure the device.
|
Configuration |
Description |
|---|---|
|
Start Walk Test |
Walk test is used to test if the detectors can detect target objects in the detection zones. Tap , and then walk in the detection zones, and finally tap End Walk Test to view the test results: the status (normal or abnormal) will be displayed. |
|
Set DST (Daylight Saving Time) |
Tap to enter the DST settings page, and then turn on the switch to enable daylight saving time for AX PRO device. |
|
Upgrade Device |
Note:
Make sure you have the permission to access the device upgrade functionality. For details about permission settings for AX PRO, see the user manual of the device. Tap to enter the Device Upgrade page. Tap Upgrade to upgrade it. |
|
Switch Device Language |
Tap to enter the Device Language page. Select language, and you will be asked if you want to keep the names of the device and its areas. Tap Yes to keep the current names; tap No to switch the names to the default names in the switched language. Then tap Yes in the confirmation box to switch the device language. Note:
The switching process lasts for several minutes. During the process, please do NOT exit the Mobile Client, lock the screen, disconnect the device from network, or power off the device. |
|
Other Configurations |
You can do other configurations including user management, system options configuration, linking network cameras, communication settings, etc. Note:
For details about other AX PRO configurations, see the user manual of the device. |