Remote Configuration

You can configure parameters remotely for the added device such as doorbell and encoding device.

Tap to set the device (including doorbell, encoding device, NVR, DVR, and security control panel) parameters. See device user manual for details about remote configuration.

Note:

  • For doorbell's remote configuration, you can only set the chime type.

  • For AX Hub and AX Hybrid, you need to enter the installer account of the device and its password first if you have enabled EN50131 Compliant mode.

  • For those who have no permission for remote configuration: If you are on site, tap I Am at the Site in the pop-up window of no-permission prompt, to connect your mobile phone to the same Wi-Fi with the encoding device and log into the device to perform remote configuration; if you are off site, tap Apply for Permission in the pop-up window to apply for permission for remote configuration. See details in Apply for Device Permission.

  • Make sure the device is online.