Create a Template

You should create a template which will be used for batch configuring parameters of AX PROs.

On the Home page, tap More > Remote Batch Config, or tap Remote Batch Config on the Home page.
Tap Templates > Add Template to add a template.
Select the template content and configure the parameters as needed. These configured parameters can be batch applied to AX PROs.
Tap Confirm to save the template.

The following are the detailed parameters explanations.

Alarm Receiving Center

Protocol Type: Select ADM-CID, ISUP, SIA-DCS, *SIA-DCS, *ADM-CID, CVS-IP, FSK Module, RDC Module, or IDS Module as the protocol type.

Note:
When selecting *SIA-DCS or *ADM-CID, you should configure the Encryption Arithmetic and Secret Key.
Address Type(Alarm Receiver Server): Select IP or Domain as the address type, and enter the IP address or domain name of the alarm receiver server accordingly.
Port (Alarm Receiver Server): Enter the port No. of the alarm receiver server.
Account Code: Enter the assigned account provided by the alarm receiving center.
Transmission Mode: Select TCP or UDP as the transmission mode.
Impulse Counting Time: Set the timeout period waiting for the receiver to respond. Re-transmission will be arranged if the transceiver of receiving center is timed out.
Attempts: Set the maximum re-transmission attempts.
Polling Rate: Enable the function and set the interval between two live polling.
Periodic Test: Enable the function and set the interval between two periodic tests.
Companies: Select a company from the drop-down list.

Note:
If you select French Alarm Receiving Company, you should configure PIRCAM Picture Upload Mode.

Event Types Notification - ARC

Select which alarm receiving center to receive event notifications and the corresponding event types, including Zone Alarm/Lid Opened, Peripherals Lid Opened, Panel Lid Opened, Panic Alarm, etc.

Notification by Email

Enable the function of sending video verification event and configure the related parameters including the sender's name and email address, the SMTP server's IP address and port No., and the receiver's name and email address, etc.

Server Authentication: If enabled, you should enter the sender's user name and password for authentication.

FTP Settings

Address Type: Select IP or Domain as the address type, and enter the IP address or domain name of the FTP server accordingly.
Port: Enter the port No. of the FTP server.
Protocol Type: Select FTP or SFTP as the protocol type.
User Name: Enter the user name of the FTP server.
Password: Enter the password of the FTP server.
Enable Anonymity: If enabled, you do not need to enter the user name and password of the FTP server.

Note:
This function is only available when selecting FTP as the protocol type.
Directory Structure: The saving path of snapshots in the FTP server.

Arming Schedule

Auto Arm: Enable the function and set the arming start time. The area will be automatically armed according to the configured time.
Auto Disarm: Enable the function and set the disarming start time. The area will be automatically disarmed according to the configured time.

Note:
The auto arming time and the auto disarming time cannot be the same.
Late to Disarm: Enable the device to push a notification to the phone or tablet to remind the user to disarm the area when the area is still armed after a specific time point.
Weekend Exception: Enable the function and set the specific day(s) as weekend. The area will not be armed or disarmed on the weekend.
Holiday Settings: Enable the function and add holiday(s) as needed. The area will not be armed or disarmed on the holiday(s).

Note:
You can set up to 6 holiday groups.
Auto Arm Sound Prompt: If Auto Arming Sound Prompt is enabled, the AX PRO will sound for a prompt when it is armed automatically.

Note:
This setting will take effect on all areas.
Alarm Duration: The duration of the alarm.