A display screen linked to the lane can be used for displaying date and time, parking duration, plate number, and expiration prompt.

1. On the Home page, click Vehicle > Parking Lot.
2. Select an entrance and exit in the Entrance and Exit list.

   The display screen linked to the entrance/exit is displayed in the entrance/exit area.

3. Click beside the display screen name to open the Screen Configuration window.
   Figure 1. Screen Configuration Window
4. Click the four different lines in theVehicle Detected screen and select information type under the Text on Screen frame. You can display Plate No./Entering Time/Parking Duration/Expiration Prompt on the screen.

   Plate No.

   Used for displaying license plate number recognized by the capture unit. Click to add it to the Text on Screen area.

   Entering Time

   The time when a recognized vehicle enters the parking lot.

   Parking Duration

   The duration (exiting time minus entering time) a vehicle parked for. Click to add it to the Text on Screen area and enter a number as required.

   Expiration Prompt

   Inform the vehicle owners that their vehicles are about to expire. You need to enable the expiration prompt for a parking lot and set when to inform vehicle owners the expiration date. See Add Parking Lot for details.

5. Click each different line in the Vehicle Detected screen and select display mode, font color, and alignment for information in each line.
6. Click a line in the Idle screen and click Free Spaces, and the free spaces amount will be displayed in the selected line when there is no vehicle detected at the lane.
7. Click the line displaying free spaces and select a display mode, font color, and alignment for it.
8. Click Save to save the screen settings.