Edit Online Device's Network Information

Edit Online Device's Network Information

The online devices, which have IP addresses in the same local subnet with SYS server or Web Client, can be detected by HikCentral Professional. For the detected online devices, you can edit their network information as desired via HikCentral Professional remotely and conveniently. For example, change the device IP address due to the changes of the network.

For some devices, you must activate it before editing its network information. Refer to Create Password for Inactive Device(s) for details.

Perform this task when you need to edit the network information for the detected online devices. Here we take editing encoding device as an example.

  1. Click Physical View > Encoding Deviceto enter the Encoding Device Management page.
    Note:

    • For access control devices, click Physical View > Access Control Device to enter the access control device management page.

    • For security control devices, click Physical View > Security Control Device to enter the security control device management page.

    • For decoding devices, click Physical View > Smart Wall. On the Decoding Device area, click Add and check Online Devices as Adding Mode.

  2. In the Online Device area, select a network type.
    Server Network

    The detected online devices in the same local subnet with the SYS server will list in the Online Device area.

    Local Network

    The detected online devices in the same local subnet with the Web Client will list in the Online Device area.

  3. View the device status (shown on Security column) and click in the Operation column of an active device.
  4. Change the required parameters, such as IP address, device port, HTTP port, subnet mask, and gateway.
    Note:

    The parameters may vary for different device types.

  5. Click .
  6. Enter device's password.
  7. Click Save.

Edit Online Device's Network Information

The online devices, which have IP addresses in the same local subnet with SYS server or Web Client, can be detected by HikCentral Professional. For the detected online devices, you can edit their network information as desired via HikCentral Professional remotely and conveniently. For example, change the device IP address due to the changes of the network.

For some devices, you must activate it before editing its network information. Refer to Create Password for Inactive Device(s) for details.

Perform this task when you need to edit the network information for the detected online devices. Here we take editing encoding device as an example.

  1. Click Physical View > Encoding Deviceto enter the Encoding Device Management page.
    Note:

    • For access control devices, click Physical View > Access Control Device to enter the access control device management page.

    • For security control devices, click Physical View > Security Control Device to enter the security control device management page.

    • For decoding devices, click Physical View > Smart Wall. On the Decoding Device area, click Add and check Online Devices as Adding Mode.

  2. In the Online Device area, select a network type.
    Server Network

    The detected online devices in the same local subnet with the SYS server will list in the Online Device area.

    Local Network

    The detected online devices in the same local subnet with the Web Client will list in the Online Device area.

  3. View the device status (shown on Security column) and click in the Operation column of an active device.
  4. Change the required parameters, such as IP address, device port, HTTP port, subnet mask, and gateway.
    Note:

    The parameters may vary for different device types.

  5. Click .
  6. Enter device's password.
  7. Click Save.