You can add the Behavior Analysis Server to the system for behavior analysis (such as intrusion detection, loitering detection, parking detection, people gathering detection), to receive the behavior analysis related alarms from the server.

1. Click Physical View > DeepinMind Server.
2. Click Add to enter the Add DeepinMind Server page.
3. Select the Server Type as Behavior Analysis Server.
   Figure 1. Add Behavior Analysis Server Page
4. Set the required basic information such as device address, device port number, and WAN access.

   Device Address

   IP address of the Behavior Analysis Server.

   Device Port

   The device port of the Behavior Analysis Server. By default, the port is 443, which means the security audit server access to HikCentral Professional by HTTPS.

   Enable WAN Access

   Enable the Behavior Analysis Server to access WAN (Wide Area Network).

   Note:

   After enabling the WAN Access, you need to set the WAN IP address and log collection port for WAN access.

   Alias

   Enter an alias for the Behavior Analysis Server.

   User Name

   Enter the user name that has the privilege log into the Behavior Analysis Server.

   Password

   Enter the password of the user that has the privilege log into the Behavior Analysis Server.

5. Configure behavior analysis settings.
   1. Click Add.
   2. Select camera(s) from the area list or enter keywords to search camera(s).
      Note:

      You can add up to 64 cameras for one behavior analysis server.

   3. Select the analysis task for the server.
6. Finish adding the Behavior Analysis Server.

   • Click Add to finish adding the server.

   • Click Add and Continue to add the server and continue to add more.