Add a Detected Online Security Control Device

You can add the detected online security control devices, and here we introduce the process for adding single one device.

Make sure the security control devices you are going to use are correctly installed and connected to the network as specified by the manufacturers. Such initial configuration is required in order to be able to connect the devices to the system via network.
The devices to be added should be activated. Refer to Create Password for Inactive Device(s) for detailed operation about activating devices.

Click Physical View > Security Control Device to enter the Security Control Device Management page.
In the Online Device area, select a network type.

Server Network

As the default selection, the detected online devices in the same local subnet with the SYS server will list in the Online Device area.

Local Network

The detected online devices in the same local subnet with the current Web Client will list in the Online Device area.
In the Online Device area, select Hikvision Private Protocol or Hikvision ISUP Protocol to filter the detected online devices.
In the Online Device area, select the active device to be added .
Click to open the Add Online Device window.
Enter the required information.

Note:
The device's IP address and port number can be automatically shown in Device Address field and Device Port field.

CAUTION:

The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
Optional: Select a time zone for the device in drop-down list of Time Zone of Device.

Note:
You can check Apply to Device so that when the time zone of the device and the system are not consistent, the system will automatically apply the time zone settings to the device.
Optional: Set the Add Channel to Area switch to ON to import the channels (including cameras, alarm inputs, alarm outputs and radars) of the added security control device to an area.
Note:
- You can select Specified Alarm Input and Radar and select the specified alarm inputs and radars to import to the area.
- System will generate security control partitions in the area, based on the settings on the device.
- You can create a new area by the device name or select an existing area.
- If you do not import channels to area, you cannot perform the further configurations for the channels.
Click Add.

Optional: Perform the following operations after adding the online device.

Option	Description
Remote Configurations	Click to set the remote configurations of the corresponding device. Note: For details about remote configuration, see the user manual of the device.
Change Password	Select the added device(s) and click to change the password for the device(s). Note: You can only change the password for online HIKVISION devices currently. If the devices have the same password, you can select multiple devices to change the password for them at the same time.

Add a Detected Online Security Control Device

You can add the detected online security control devices, and here we introduce the process for adding single one device.

Make sure the security control devices you are going to use are correctly installed and connected to the network as specified by the manufacturers. Such initial configuration is required in order to be able to connect the devices to the system via network.
The devices to be added should be activated. Refer to Create Password for Inactive Device(s) for detailed operation about activating devices.

Click Physical View > Security Control Device to enter the Security Control Device Management page.
In the Online Device area, select a network type.

Server Network

As the default selection, the detected online devices in the same local subnet with the SYS server will list in the Online Device area.

Local Network

The detected online devices in the same local subnet with the current Web Client will list in the Online Device area.
In the Online Device area, select Hikvision Private Protocol or Hikvision ISUP Protocol to filter the detected online devices.
In the Online Device area, select the active device to be added .
Click to open the Add Online Device window.
Enter the required information.

Note:
The device's IP address and port number can be automatically shown in Device Address field and Device Port field.

CAUTION:

The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
Optional: Select a time zone for the device in drop-down list of Time Zone of Device.

Note:
You can check Apply to Device so that when the time zone of the device and the system are not consistent, the system will automatically apply the time zone settings to the device.
Optional: Set the Add Channel to Area switch to ON to import the channels (including cameras, alarm inputs, alarm outputs and radars) of the added security control device to an area.
Note:
- You can select Specified Alarm Input and Radar and select the specified alarm inputs and radars to import to the area.
- System will generate security control partitions in the area, based on the settings on the device.
- You can create a new area by the device name or select an existing area.
- If you do not import channels to area, you cannot perform the further configurations for the channels.
Click Add.

Optional: Perform the following operations after adding the online device.

Option	Description
Remote Configurations	Click to set the remote configurations of the corresponding device. Note: For details about remote configuration, see the user manual of the device.
Change Password	Select the added device(s) and click to change the password for the device(s). Note: You can only change the password for online HIKVISION devices currently. If the devices have the same password, you can select multiple devices to change the password for them at the same time.