After adding the access control device, you can configure the parameters for its alarm inputs.

1. Click Access Control > Advanced Function > Device Parameter .
2. In the device list on the left, click to expand the door, select an alarm input and you can edit the alarm input's parameters on the right.
3. Set the alarm input parameters.

   Name

   Edit the alarm input name as desired.

   Detector Type

   The detector type of the alarm input.

   Zone Type

   Set the zone type for the alarm input.

   Sensitivity

   Only when the duration of signal detected by the detector reaches the setting time, the alarm input is triggered. For example, you have set the sensitivity as 10ms, only when the duration of signal detected by the detector reach 10ms, this alarm input is triggered.

   Trigger Alarm Output

   Select the alarm output(s) to be triggered.

4. Click OK.
5. Optional: Click the switch on the upper-right corner to arm or disarm the alarm input.