Configure Multi-door Interlocking

Configure Multi-door Interlocking

You can set the multi-door interlocking between multiple doors of the same access control device. To open one of the doors, other doors must keep closed. That means in the interlocking combined door group, up to one door can be opened at the same time.

Add access control device to the client, and make sure the device supports the multi-door interlocking function.

Note:

  • Multi-door Interlocking function is only supported by the access control device which has more than one access control points (doors).

  • Either the anti-passing back or multi-door interlocking function can be configured for an access control device at the same time. For the configuration of anti-passing back function, refer to Configure Anti-Passback.

  1. Click Access Control > Advanced Function > Multi-door Interlocking.
  2. Select an access control device on the left panel.
  3. Click Add on the Multi-door Interlocking List panel to open Add Access Control Point to open the Add window.
  4. Select at least two access control points(doors) from the list.
    Note:

    Up to four doors can be added in one multi-door interlocking combination.

  5. Click OK to add the selected access control point(s) for interlocking.

    The configured multi-door interlocking combination will list on the Multi-door Interlocking List panel.

  6. Optional: Select an added multi-door interlocking combination from the list and click Delete to delete the combination.
  7. Click Apply to apply the settings to the access control device.

Configure Multi-door Interlocking

You can set the multi-door interlocking between multiple doors of the same access control device. To open one of the doors, other doors must keep closed. That means in the interlocking combined door group, up to one door can be opened at the same time.

Add access control device to the client, and make sure the device supports the multi-door interlocking function.

Note:

  • Multi-door Interlocking function is only supported by the access control device which has more than one access control points (doors).

  • Either the anti-passing back or multi-door interlocking function can be configured for an access control device at the same time. For the configuration of anti-passing back function, refer to Configure Anti-Passback.

  1. Click Access Control > Advanced Function > Multi-door Interlocking.
  2. Select an access control device on the left panel.
  3. Click Add on the Multi-door Interlocking List panel to open Add Access Control Point to open the Add window.
  4. Select at least two access control points(doors) from the list.
    Note:

    Up to four doors can be added in one multi-door interlocking combination.

  5. Click OK to add the selected access control point(s) for interlocking.

    The configured multi-door interlocking combination will list on the Multi-door Interlocking List panel.

  6. Optional: Select an added multi-door interlocking combination from the list and click Delete to delete the combination.
  7. Click Apply to apply the settings to the access control device.