Set Manual Capture Parameters

Set Manual Capture Parameters

In Status Monitoring module, you can capture a picture manually the access control device's camera by clicking a button. Before that, you need to set the parameters for the capture such as picture quality.

Before setting the capture parameters, you should set the saving path first to define where the captured pictures are saved. For details, refer to #GUID-0507611D-D61F-4D36-91AB-A8CC9F4FFE3E.

Note:

This function should be supported by the device

  1. Enter the Access Control module.
  2. On the navigation bar on the left, enter Advanced Function > More Parameters > Capture.
  3. Select an access control device in the device list and select Manual Capture.
  4. Select the resolution of the captured pictures from the drop-down list.
  5. Select the picture quality as High, Medium, or Low. The higher the picture quality is, the larger size the picture will be.
  6. Click Save.

Set Manual Capture Parameters

In Status Monitoring module, you can capture a picture manually the access control device's camera by clicking a button. Before that, you need to set the parameters for the capture such as picture quality.

Before setting the capture parameters, you should set the saving path first to define where the captured pictures are saved. For details, refer to #GUID-0507611D-D61F-4D36-91AB-A8CC9F4FFE3E.

Note:

This function should be supported by the device

  1. Enter the Access Control module.
  2. On the navigation bar on the left, enter Advanced Function > More Parameters > Capture.
  3. Select an access control device in the device list and select Manual Capture.
  4. Select the resolution of the captured pictures from the drop-down list.
  5. Select the picture quality as High, Medium, or Low. The higher the picture quality is, the larger size the picture will be.
  6. Click Save.