You can set the mode for the device to upload logs via EHome protocol.

1. Enter the Access Control module.
2. On the navigation bar on the left, enter Advanced Function > More Parameters.
3. Select an access control device in the device list and enter Network > Uploading Mode.
4. Select the center group from the drop-down list.
5. Check Enable to enable to set the uploading mode.
6. Select the uploading mode from the drop-down list.

   • Enable N1 or G1 for the main channel and the backup channel.

   • Select Close to disable the main channel or the backup channel
   Note:

   The main channel and the backup channel cannot enable N1 or G1 at the same time.

7. Click Save.