Add a card for the user and the user can authenticate via the added card.

1. Tap User > + to enter the Add User page.
2. Tap the Employee ID. field and edit the employee ID.
   Note:

   • The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers.

   • The employee ID should not start with 0 and should not be duplicated.

3. Tap the Name field and input the user name on the soft keyboard.
   Note:

   • Numbers, upper case letters, lower case letters, and special characters are allowed in the user name.

   • Up to 32 characters are allowed in the user name.

4. Tap the Card field and input the card No.
5. Configure the card No.
   • Enter the card No. manually.
   • Swipe the card over the card swiping area to get the card No.
   Note:

   • The card No. cannot be empty.

   • Up to 20 characters are allowed in the card No.

   • The card No. cannot be duplicated.

6. Optional: Enable the Duress Card function. The added card

   When the user authenticates by swiping this duress card, the device will upload an duress card event to the client software.

7. Enable or disable the Administrator Permission function.

   Enable Administrator Permission

   The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission.

   Disable Administrator Permission

   The User is the normal user. The user can only authenticate or take attendance on the initial page.

8. Optional: Tap the Schedule Template field, select a schedule template and save the settings.
9. Tap to save the settings.