You can set a regular report rule for specified heat map cameras, and the system can send an email with a report attached to the target recipients daily, weekly, or monthly, showing the heat map data (people dwell time at each location and number of people detected) during the specified time periods.

1. Click System > Report to enter the report settings page.
2. Click Add to open the Add Report page.
3. Select Heat Analysis as the report category.
4. Select heat analysis type.

   Heat Analysis for One Camera

   Analyze people dwell time and number of people detected by the specified camera(s).

   Heat Analysis in One Region

   Analyze people dwell time and number of people detected by the cameras in the specified heat analysis group(s).

   Note:

   For details about adding heat analysis group, see Add Heat Analysis Group.

5. Create a name for the report.
6. Select the report target.
   1. Click Add and then select camera(s) or a heat analysis group(s) from the Resource Group/Area list.
      Note:

      If you select Heat Analysis for One Camera in step 4，you should select camera(s). If you select Heat Analysis in One Region, you should select heat analysis group(s).

   2. Click Add.
   3. Optional: Click to delete a camera or a heat analysis group, or click Delete All to delete all selected item(s).
7. Set the report type as Daily, Weekly, or Monthly.

   Daily Report

   Daily report shows data on a daily basis. The system will send one report at the sending time every day, which contains data detected on the day (24 hours) before the current day.

   For example, if you set the sending time as 20:00, the system will send a report at 20:00 every day, containing the heat map data detected between 00:00 and 24:00 before the current day.

   Weekly Report and Monthly Report

   As compared to daily report, weekly report and monthly report can be less time-consuming, since they are not to be submitted every day. The system will send one report at the sending time every week or every month, which contains the heat map data detected on the last 7 days or last month before the sending date.

   For example, for weekly report, if you set the sending time as 6:00 on Monday, the system will send a report at 6:00 in the morning on every Monday, containing heat map data detected between last Monday and Sunday.

8. After setting the report type, set how the report will present the data detected in the specified time period.

   For example, if you select the report type as Weekly, you can select Calculate by Day or Calculate by Hour. There will be 7 or 7×24 records for each camera respectively in the report, showing the people amount or dwell time detected on each day or each hour for one camera.

9. Set the content in the report.

   Dwell Time

   The minutes that the people stay at the same location during each time period for each camera.

   People Amount

   The number of people detected during each time period for each camera.

   Average Dwell Time

   The average time that each people stay at a same location during each time period for each camera. The value is calculated by dividing the dwell time by the number of people who appear at the location.

   Note:

   • The Number of People who Appear at a Location= The Number of People who Stay at the Location at the End of Previous Time Period + The Number of People who Visit the Location at the Current Time Period.

   • The number of people who appears at a location refers to the number of people who visits the location from 00:00:00 to 23:59:59.

10. Set the sending time according to the report type.
11. Select the email template from the drop-down list to define the recipient information and email format.
    Note:

    You can click Add New to add a new email template. For setting the email template, refer to Set Email Template.

12. Select the Report Language.
13. Finish adding the report.

    • Click Add to add the report and go back to the report list page.

    • Click Add and Continue to add the report and continue adding other reports.