Set NTP

Set NTP

You can set the NTP server for syncing the time between the SYS and the NTP server.

Note:

For devices added via ONVIF protocol, time synchronization will fail. Please configure the time on the device locally and make sure the device's NTP settings are the same with the system's.

  1. Click System > Network > NTP Settings.
  2. Set the Time Synchronization switch to ON to enable the NTP function.
  3. Set the NTP server address and NTP port.
  4. Enter the interval for the auto time synchronization.
  5. Optional: Click Test to test the communication between the SYS and NTP server.
  6. Click Save.

Set NTP

You can set the NTP server for syncing the time between the SYS and the NTP server.

Note:

For devices added via ONVIF protocol, time synchronization will fail. Please configure the time on the device locally and make sure the device's NTP settings are the same with the system's.

  1. Click System > Network > NTP Settings.
  2. Set the Time Synchronization switch to ON to enable the NTP function.
  3. Set the NTP server address and NTP port.
  4. Enter the interval for the auto time synchronization.
  5. Optional: Click Test to test the communication between the SYS and NTP server.
  6. Click Save.