After adding the video intercom devices, you can configure parameters for them remotely, including device time, maintenance settings, etc.
The parameters may vary with different models of devices.
You can view the time zone where the device locates and set the following parameters.
For door station, you can set this function switch to on and select a shortcut button. When the configured button on the device is pressed, it will call management center. The default button is 1
For outer door station and door station which supports Mifare encryption, you can enable Mifare Encryption and select the sector. Only the card with the same encrypted sector can be granted by swiping the card on the card reader.
For indoor station, you can relate the camera(s) with it to view the video of the related camera(s) on the indoor station. You can also delete the related camera(s). Up to 16 related cameras are supported.
You can reboot a device remotely, and restore it to its default settings.
For more configurations, you can click Configuration to go to Remote Configuration page of the device.
After adding the video intercom devices, you can configure parameters for them remotely, including device time, maintenance settings, etc.
The parameters may vary with different models of devices.
You can view the time zone where the device locates and set the following parameters.
For door station, you can set this function switch to on and select a shortcut button. When the configured button on the device is pressed, it will call management center. The default button is 1
For outer door station and door station which supports Mifare encryption, you can enable Mifare Encryption and select the sector. Only the card with the same encrypted sector can be granted by swiping the card on the card reader.
For indoor station, you can relate the camera(s) with it to view the video of the related camera(s) on the indoor station. You can also delete the related camera(s). Up to 16 related cameras are supported.
You can reboot a device remotely, and restore it to its default settings.
For more configurations, you can click Configuration to go to Remote Configuration page of the device.