Add Radar to Area for Current Site

Add Radar to Area for Current Site

You can add radars to different areas of the current site according to their locations, so that you will be informed when an alarm/event is triggered if you have configured an alarm/event.

The devices need to be added to the HikCentral Professional for area management. Refer to Manage Resource for detailed configuration about adding devices.

Note:

You cannot add a radar to multiple areas.

  1. Click Logical View on the Home page to enter the Area Management page.
  2. In the area list panel, select the added current site in the drop-down site list to show its areas.
    Note:

    The icon indicates that the site is current site.

  3. Select an area.
  4. Click Radars tab.
  5. Click Add to enter the Add Radar page.
  6. Search a radar in the Radar and select a radar in the searching results.
  7. Select an area in the Add to Area frame.
    Note:

    You can click Add New Area to add a new area to the site.

    Figure 1. Add Radar Page
  8. Optional: Check Add to Map to add the camera to the map.
    Note:

    • You can go back to the Radars tab and drag the radar to another map.

    • You can perform operations on the map including editing radar, deleting radar on the map, editing detection area, drawing zone, selecting related cameras, and calibrate PTZ camera. See Edit Radar for Current Site for details.

  9. Click Add.
  10. Optional: Check added radars in the list and click Arm/Disarm to arm or disarm the checked radars.
    Note:

    An event will be triggered if anybody or an object enters an armed radar's detection area.

Add Radar to Area for Current Site

You can add radars to different areas of the current site according to their locations, so that you will be informed when an alarm/event is triggered if you have configured an alarm/event.

The devices need to be added to the HikCentral Professional for area management. Refer to Manage Resource for detailed configuration about adding devices.

Note:

You cannot add a radar to multiple areas.

  1. Click Logical View on the Home page to enter the Area Management page.
  2. In the area list panel, select the added current site in the drop-down site list to show its areas.
    Note:

    The icon indicates that the site is current site.

  3. Select an area.
  4. Click Radars tab.
  5. Click Add to enter the Add Radar page.
  6. Search a radar in the Radar and select a radar in the searching results.
  7. Select an area in the Add to Area frame.
    Note:

    You can click Add New Area to add a new area to the site.

    Figure 1. Add Radar Page
  8. Optional: Check Add to Map to add the camera to the map.
    Note:

    • You can go back to the Radars tab and drag the radar to another map.

    • You can perform operations on the map including editing radar, deleting radar on the map, editing detection area, drawing zone, selecting related cameras, and calibrate PTZ camera. See Edit Radar for Current Site for details.

  9. Click Add.
  10. Optional: Check added radars in the list and click Arm/Disarm to arm or disarm the checked radars.
    Note:

    An event will be triggered if anybody or an object enters an armed radar's detection area.