Person Management
Click Add to add the person's information, including the basic information, certificate, authentication and settings.
Add Basic Information
Click to enter the Add Person page.
Add the person's basic information, including the employee ID, the person's name, gender, and person type.
If you select Visitor as the person type, you can set the visit times.
If you select Custom Type, you can edit the name. The changed name will be applied to the device.
Select Person Role.
Click Save to save the settings.
Set Permission Time
Click to enter the Add Person page.
Enable Long-Term Effective User, or set Long-Term Effective User, and the person can only has the permission within the configured time period according to your actual needs.
You can enable Attendance Check Only. After enabling, this person won’t be given access control permission.
Set the door permission.
Click Save to save the settings.
Set Device No.
Click to enter the Add Person page.
Click the textbox of Floor No. and Room No. and enter a numeric between 1 and 999 to set the floor No. and room No.
Click Save to save the settings.
Authentication Settings
Click to enter the Add Person page.
Set the authentication type.
Click Save to save the settings.
Add Card
Click to enter the Add Person page.
Click Add Card, enter the Card No. and select the Property, and click OK to add the card.
Click Save to save the settings.
Add Face Picture
Click to enter the Add Person page.
Click + Upload to upload a face picture from the local PC.
The picture format should be JPG or JPEG or PNG, and the size should be less than 200 kb.
Click Save to save the settings.
Add Fingerprint
Only devices supporting the fingerprint function can add the fingerprint.
Click to enter the Add Person page.
Click Add Fingerprint, and press your finger on the fingerprint module of the device to add your fingerprint.
Click Save to save the settings.
Add Keyfob
Click to enter the Add Person page.
Click + Add Keyfob, enter keyfob Serial No. or click Read, and press any button of the keyfob to obtain the keyfob Serial No. , and click OK.
-
Each person can add up to one keyfob, and the device can add up to 5,000 keyfobs.
-
Before adding a keyfob, you need to plug in the corresponding peripheral module on the face recognition terminal. You need to plug in the WE series peripheral module to add the WE series keyfob. And you need to plug in the WB series peripheral module to add the WB series keyfob.
Add PIN
Before configuring PIN, it is necessary to clarify whether the PIN is a device-set personal PIN or a platform-applied personal PIN. If it is a device-set personal PIN, it can be created or edited on the device or on the web, and cannot be set on other platforms; If it is a platform-applied personal PIN, it can be created or edited on the platform, and issued to the device before it can be used. It cannot be set on the device or on the web.
Make sure you have already set the PIN mode as Device-Set Personal PIN in #GUID-A937E34A-4FD4-4E1A-8D16-CEACC5660BCC. Click PIN Mode on the page to go to configure.
Click to enter the Add Person page.
Set the PIN. Or click Auto Generate to generate a PIN automatically.
Click Add to save the settings.
Click Save and Continue to save the settings and continue to add next person.
Device No. Settings
Click to enter the Add Person page.
Add the person's basic information. Go to the Device No. module. Click Add and enter the person belonged room No. and floor No. Click Add or Save and Continue.
Delete Person
On the person management page, check the person need to delete and click Delete.
Click Clear All to clear all person.
Edit Person
On the person management page, check the person need to edit. Click
to edit the person information.
Filter
On the person management page, enter Employee ID / Name / Card No.. Select Credential Status, and click Filter to filter the person. Click Reset to clear all conditions.