Import Data

  1. Plug a USB flash drive in the device.
  2. On the Home page, tap Data > Import Data.
  3. Tap User Data, Face Data or Access Control Parameters .
    Note:

    The imported access control parameters are configuration files of the device.

  4. Enter the created password when you exported the data. If you do not create a password when you exported the data, leave a blank in the input box and tap OK immediately.
    Note:

    • If you want to transfer all user information from one device (Device A) to another (Device B), you should export the information from Device A to the USB flash drive and then import from the USB flash drive to Device B. In this case, you should import the user data before importing the profile photo.

    • The supported USB flash drive format is FAT32.

    • The imported pictures should be saved in the folder (named enroll_pic) of the root directory and the picture's name should be follow the rule below:

      Card No._Name_Department_Employee ID_Gender.jpg

    • If the folder enroll_pic cannot save all imported pictures, you can create another folders, named enroll_pic1, enroll_pic2, enroll_pic3, enroll_pic4, under the root directory.

    • The employee ID should be less than 32 characters. It can be a combination of lower letters, upper letters, and numbers. It should not be duplicated, and should not start with 0.

    • Requirements of face picture should follow the rules below: It should be taken in full-face view, directly facing the camera. Do not wear a hat or head covering when taking the face picture. The format should be JPEG or JPG. The resolution should be 640 × 480 pixel or more than of 640 × 480 pixel. The picture size should be between 60 KB and 200 KB.