Add Keyfob

Add a keyfob for the user.

Note:

  • Before adding a keyfob, you need to plug in the corresponding peripheral module on the face recognition terminal. You need to plug in the WE series peripheral module to add the WE series keyfob. And you need to plug in the WB series peripheral module to add the WB series keyfob.

  • The function should be supported by the device.

  • Each person can add up to one keyfob, and the device can add up to 5,000 keyfobs.

  1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and enter the device backend.
  2. Tap User > + to enter the Add User page.
  3. Tap the Employee ID. field and edit the employee ID.
    Note:

    • The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers.

    • The employee ID should not start with 0 and should not be duplicated.

  4. Tap the Name field and input the user name on the soft keyboard.
    Note:

    • Numbers, upper case letters, lower case letters, and special characters are allowed in the user name.

    • The suggested user name should be within 32 characters.

  5. Tap Keyfob > + > Keyfob Serial No., enter keyfob Serial No. or press any button of the keyfob to obtain the keyfob Serial No.
  6. Tap to save the settings.