No. and System Network

  1. Click in the top right of the web page to enter the wizard page. After previous settings, you can click Next to enter the No. and Network System Network settings page.
  2. Set the device type.
    Note:

    • If set the device type as Door Station, you can set the Floor No., Door Station No., Community No., Building No., Unit No., Floor No., and Door Station No..

    • If set the device type as Outer Door Station, you can set Outer Door Station No., and Community No.

    Device Type

    The device can be used as a door station or outer door station. Select a device type from the drop-down list.

    Community No.

    Set the device community No.

    Building No.

    Set the device building No.

    Unit No.

    Set the device unit No.

    Floor No.

    Set the device installed floor No.

    Door Station No.

    Set the device installed door station No.

    Note:

    The main door station No. is 0, and the sub door station No. ranges from 1 to 16.

    Outer Door Station No.

    Set the device installed outer door station No.

    Note:

    The No. ranges from 1 to 99.

  3. Set the video intercom network parameters.
    Registration Password

    Set the registration password of the main station for communication. Set the registration password of the main station for communication.

    Main Station IP

    Enter the main station’s IP address that used for communication.

    Private Server IP

    Refers to the SIP server IP. Enter the main station’s IP address that used for communication. At this time the main station is used as a SIP server. Other intercom devices should registered to this server address to realize communication.

    Enable Protocol 1.0

    If enabled, the door station can be registered to the main station by old protocol version. If disabled, the door station can be registered to the main station by new protocol version.

  4. Click Complete to save the settings after the configuration.