You can view the system information and the capacity. You can also upgrade the device, restore to factory settings, restore to default settings, reboot the device, set face parameters and view version information.
Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the home page. Tap Maint.
Hold the ? on the upper-right corner of the page and enter the password to view the version of the device.
You can view the device model, serial No., versions, address, production data, QR code, and open source code license.
The page may vary according to different device models. Refers to the actual page for details.
You can view the number of, user, face picture, card, keyfob and event.
If the device has been connected to Hik-Connect and network, when there is a new installation package in Hik-Connect, you can tap to upgrade the device system.
Plug the USB flash drive in the device USB interface. Tap , and the device will read the digicap.dav file in the USB flash drive to start upgrading.
After unlinking APP account, you cannot operate via APP.
All parameters, except for the communication settings, remotely imported user information, will be restored to the default settings. The system will reboot to take effect.
All parameters will be restored to the factory settings. The system will reboot to take effect.
Reboot the device.
Long Tap ? on the right corner to enter the advanced settings page. Enter the password.
After enabling face anti-spoofing function, you can set the matching security level when performing live face authentication.
The larger the value, the smaller the false accept rate and the larger the false rejection rate. The smaller the value, the larger the false accept rate and the smaller the false rejection rate.
After enabling this function, the device will lock automatically when anti-spoofing detection failed.
The lock duration after enabling Lock Face for Anti-Spoofing Protection when anti-spoofing detection failed.
You can view the device information.