Multi-Door Interlocking Settings

Set the multi-door interlocking between multiple doors of the same access control device. To open one of the doors, other doors must keep closed.

  1. Click Access Control > Access Control Application > Cross-Device Multi-Door Interlocking.
  2. Enable the function.
  3. Select Device Type
    • If the device set as main device, you need to set Port No., and click Add to add access point. Click Sub Device Management, you can view device status and delete the device.
    • If the device set as sub device, you need to set access controller parameters, including Main Device IP Address, Main Device Port No.and Main Device Password. Set device registered code, and you can view Registration Status. Check Card Reader. Unchecked card reader cannot be interconnected for anti-passback.
  4. Set Anti-Passback Rule.
    By Authentication Status

    Anti-Passback Routine judged by authentication via card.

    By Actual Traffic Status

    Anti-Passback Routine judged by actual card opening.

  5. Click OK.