Add Face Picture

Add user's face picture to the device. And the user can use the face picture to authenticate.

1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend.
2. Tap User > + to enter the Add User page.
3. Edit the employee ID.
   Note:

   • The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers.

   • The employee ID should not be duplicated.

4. Tap the Name field and input the user name on the soft keyboard.
   Note:

   • Numbers, upper case letters, lower case letters, and special characters are allowed in the user name.

   • The suggested user name should be within 32 characters.

5. Tap the Face Picture field to enter the face picture adding page.
   Figure 1 Add Face Picture
6. Look at the camera.
   Note:

   • Make sure your face picture is in the face picture outline when adding the face picture.

   • Make sure the captured face picture is in good quality and is accurate.

   • For details about the instructions of adding face pictures, see Tips When Collecting/Comparing Face Picture.

   After completely adding the face picture, a captured face picture will be displayed at the upper right corner of the page.

7. Tap Save to save the face picture.
8. Optional: Tap Try Again and adjust your face position to add the face picture again.
9. Set the user role.

   Administrator

   The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission.

   Normal User

   The User is the normal user. The user can only authenticate or take attendance on the initial page.

10. Tap to save the settings.