The 2-Wire HD devices can be used in different situations.

Cable and transmission distance between devices should follow rules below.

After door stations have been connected to indoor stations, you can set rotary DIP switch of these devices.

After powering on the device, the indoor station and door station can conduct the following operation.

You can enable AP mode on device or on PC Web.

You can log into the Web browser for device configuration.

If you forget the password when logging in, you can change the password via PC Web or mobile Web.

You can take an overview of the PC Web and mobile Web page.

You can manage person information on PC Web and mobile Web.

You can manage the linked device on PC Web and mobile Web.

You can view device information on PC Web and mobile Web.

You can set time/DST on PC Web and mobile Web.

You can set audio parameters on PC Web and mobile Web.

You can set motion detection parameters on PC Web and Mobile Web.

You can set access control parameters.

You can set video intercom parameters.

You can change activation/admin password on PC and Mobile Web.

You can set account security on PC Web and Mobile Web.

View device arming type and arming IP address.

The information of users logging into the device is shown.

You can set the notice publication for the device.

You can set device debugging parameters.

You can check the Serial No., Rotary Swtich No., Room No., Relay Work Mode, Network Status and other information on door station's web interface. You can also add, edit or delete relays via door station's web interface.

You can view online help document via PC Web and Mobile Web.

You can view Open Source Software License via PC Web and Mobile Web.