Safety Instruction

Safety Instruction

DANGER

  • This is a class A product and may cause radio interference in which case the user may be required to take adequate measures.

  • In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

  • The socket-outlet shall be installed near the device and shall be easily accessible.

  • The device must be connected to an earthed mains socket-outlet.

  • Install the device according to the instructions in this manual.

  • indicates hazardous live and the external wiring connected to the terminals requires installation by an instructed person.

  • Keep body parts away from fan blades. Disconnect the power source during servicing.

  • Never place the device in an unstable location. The device may fall, causing serious personal injury or death.

  • This device is not suitable for use in locations where children are likely to be present.

  • CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

  • Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).

  • Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.

  • Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.

  • Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. Dispose of used batteries according to the instructions.

CAUTION:

  • CAUTION: Double pole/Neutral fusing. After operation of the fuse, parts of the device that remain energized might represent a hazard during servicing.

  • The device has been designed, when required, modified for connection to an IT power distribution system.

  • This device is suitable for mounting on concrete or other non-combustible surface only.

  • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. The openings shall never be blocked by placing the device on a bed, sofa, rug or other similar surface.

  • No naked flame sources, such as lighted candles, should be placed on the device.

  • The device shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the device.

  • Burned fingers when handling the cover area of the device. Wait one-half hour after switching off before handling the parts.

  • CLASS 1 LASER PRODUCT

Safety Instruction

DANGER

  • This is a class A product and may cause radio interference in which case the user may be required to take adequate measures.

  • In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

  • The socket-outlet shall be installed near the device and shall be easily accessible.

  • The device must be connected to an earthed mains socket-outlet.

  • Install the device according to the instructions in this manual.

  • indicates hazardous live and the external wiring connected to the terminals requires installation by an instructed person.

  • Keep body parts away from fan blades. Disconnect the power source during servicing.

  • Never place the device in an unstable location. The device may fall, causing serious personal injury or death.

  • This device is not suitable for use in locations where children are likely to be present.

  • CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

  • Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).

  • Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.

  • Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.

  • Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. Dispose of used batteries according to the instructions.

CAUTION:

  • CAUTION: Double pole/Neutral fusing. After operation of the fuse, parts of the device that remain energized might represent a hazard during servicing.

  • The device has been designed, when required, modified for connection to an IT power distribution system.

  • This device is suitable for mounting on concrete or other non-combustible surface only.

  • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. The openings shall never be blocked by placing the device on a bed, sofa, rug or other similar surface.

  • No naked flame sources, such as lighted candles, should be placed on the device.

  • The device shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the device.

  • Burned fingers when handling the cover area of the device. Wait one-half hour after switching off before handling the parts.

  • CLASS 1 LASER PRODUCT