Other Settings
You can do other settings including setting time zone for the security control panel (hereafter simplified as device), configuring device network, enabling Arming Process to auto detect the device faults during arming process, etc.
On the device list page, tap the security control panel and log in to the
device (if required) to enter the Area page, and then tap 
to enter the Settings page.
If EN50131 Compliant mode is enabled, you should log in to the security control panel first before you can configure the device. For details about enabling EN501313 Compliant mode, see EN50131 Compliant Mode.
Device Information
View device information such as device model, battery level, and Wi-Fi status; And set time zone and enable Daylight Saving Time (DST) for the device.
System Maintenance
Reboot the device or partly restore the device.
If the device is partly restored, the device will restore to its default settings except for admin parameters, wired network parameters, Wi-Fi parameters, detector parameters, and wireless device parameters.
Configure Network
Follow the instructions to configure network for the device.
Cellular Data Network Settings
Tap to configure the related parameters.
- Mobile Network
-
If disabled, the device will not be available to use in mobile network.
- Parameter Configuration
-
You can set the phone number, user name, access password, MTU, etc.
- Data Usage Limit
-
If enabled, the cellular data usage of the security control panel per month will be limited.
You can view the data used in the current month, and set the limit per month.
Arming Process
Set the Enable Arming Process switch to on to enable the mode.
After enabled, the device will automatically detect its fault(s) during the arming process. You can determine whether to continue arming or not if fault(s) are detected.