Set Area Parameters

The Mobile Client allows you to set area parameters such as alarm duration, auto arm, and auto disarm. An area is an independent control system of a security control panel. It allows you to batch arm/disarm all zones in it. If the security control panel has two areas, you have two independent systems for arming or disarming.

1. On the device list, tap the security control panel and then log in to the device (if required) to enter the Area page.
   Note:

   If EN50131 Compliant mode is enabled, you should log in to the security control panel first before you can configure the device. For details about enabling EN50131 Compliant mode, see EN50131 Compliant Mode.

2. Tap More to enter the Settings page.
3. Configure parameters for the area.

   Auto Arm

   Enable the area to automatically arm itself in a specific time point.

   Auto Arm Time

   Set the time point for the area to automatically arm itself.

   Late to Disarm

   Enable the device to push a notification to the phone or tablet to remind the user to disarm the area when the area is still armed after a specific time point.

   Note:

   Make sure you have enabled Operation Event Notification on the web page of the security control panel, or the notification will not be pushed to the phone or tablet. For details about the web page, see the user manual of the security control panel.

   Late to Disarm Time

   Set the time point mentioned in Late to Disarm.

   Weekend Exception

   If enabled, Auto Arm, Auto Disarm, and Late to Disarm will be disabled on the weekend.

   Entry Delay 1

   Entry Delay 2

   Set a value for Entry Delay 1 and Entry Delay 2. Entry delay is a time concept. If entry delay is configured for the delayed zone, when you enter an armed delayed zone, the zone alarm will not be triggered until the end of entry delay.

   Entry delay is usually used for avoiding the triggering of false alarms when you enter a certain armed region. For example, you can set an entry delay after you arm your home. In this way, you can avoid the unnecessary triggering of intrusion alarm between the time point when you return home and the time point when you finally disarm your home.

   Note:

   After set value for Entry Delay 1 and Entry Delay 2, you should set the entry delay of a specific zone to the value of Entry Delay 1 or Entry Delay 2. see Set Zone Parameters for details.

   Exit Delay

   Set exit delay for the delayed zone. If exit delay is configured for the delayed zone, after you arm the zone on the indoor unit, you can exit the zone without triggering alarm until the end of exit delay.

   Exit delay is usually used for avoiding the triggering of false alarms when you exit a certain armed region. For example, you can set an exit delay after you arm your home. In this way, you can avoid the unnecessary triggering of intrusion alarm between the time point when you arm your home and the time point when you exit your home.