Thermal Camera Detection

The NVR supports the event detection modes of the thermal network cameras: fire and smoke detection, temperature detection, temperature difference detection, etc.

Add the thermal network camera to your device and make sure the camera is activated.

  1. Go to Smart Analysis > Smart Event Settings > Other Events.
  2. Select a thermal camera.
  3. Optional: Check Save VCA Picture to save the captured pictures of detection.
  4. Select an event detection (Temperature Measurement Alarm, etc.).
  5. Set the arming schedule. Refer to Configure Arming Schedule.
  6. Set the linkage actions. Refer to Configure Linkage Actions.
  7. Click Apply.