Keyfob Management

You can add keyfobs to the security control panel to remotely control the area of the panel.

1. On the device list page, tap the security control panel and then log in to the device to enter the area page.
2. Tap > User Management > Keyfob Management > Add New Keyfob to enter the Card/Tag Management page.
3. Select a wireless receiver or keypad.
4. Present the keyfob to the wireless receiver or keypad.
5. Press any button on the keyfob to learn.
6. Create a keyfob name.
   Note:

   • If you log in as an installer, skip this step.

   • The keyfob name should contain 1 to 32 characters.

7. Select area(s) to be linked to the keyfob.
   Note:

   If you log in as an installer, skip this step. Selecting area is only available for the administrator.

   You can remotely control the selected area(s) by the keyfob based on the permission(s) configured in step 9.

8. Set the Enable Keyfob switch to on to enable the keyfob.
   Note:

   If you log in as an installer, skip this step. Enabling keyfob is only available for the administrator.

9. Select permissions (such as the permission to disarm and clear alarm) for the keyfob to define what operations can be done via keyfob.
   Note:

   If you log in as an installer, skip this step. Setting permissions for keyfob is only available for the administrator.

10. Tap Add.
11. Optional: Enable silent panic alarm.
    1. Go to the settings page of the keyfob.
    2. Enable Silent Panic Alarm.

       When enabled, no linked alarm output (e.g., sound prompt) will be triggered when panic alarms of the keypad is triggered.