Set Wireless Card/Tag Reader Parameters

You can set the wireless card/tag reader parameters, including device name, linked area, buzzer, offline duration, and security settings.

Make sure you have added wireless card/tag readers to the security control panel.

  1. On the device list page, tap the security control panel and then log in to the device to enter the Area page.
  2. Tap Peripheral Device and then tap a wireless keypad on the device list.
  3. Set the parameters.
    Linked Area

    Set the area linked to the wireless card/tag reader. The linked area can be arm/disarm or clear alarm by swiping card/tag on the card/tag reader.

    Buzzer

    Enable the buzzer of the card/tag reader.

    Offline Duration

    If the time during which the siren loses communication with the security control panel exceeds the configured offline duration, the siren will be regarded as offline.

    Security Settings
    Locked Duration

    Specify the duration that the card/tag reader remains locked if the failed card/tag swiping attempts reach the specified maximum times.

    Maximum Failed Attempts

    Specify the maximum failed attempts for swiping card/tag. If the failure times reaches the specified value, the card/tag reader will remain locked for a specified duration.