Set Parameters of Wireless Outputs Expander

You can set the alarm output type and the output delay for the relays of a wireless outputs expander. Alarm output is the node signal or other signal sent from the alarm controller to the peripheral devices when the alarm is triggered.

Make sure you have added wireless outputs expander(s) to the security control panel.

On the device list page, tap the security control panel and then log in to the device to enter the Area page.
Tap Peripheral Device and then tap a wireless outputs expander on the device list.

The relays of the expander will be displayed.
Optional: Set the disconnection duration.

Offline Duration

If the time during which the wireless outputs expander loses communication with the security control panel exceeds the configured offline duration, the wireless outputs expander will be regarded as offline.

Note:
The default offline duration is 1 hour.

Configure the relay.

Option	Description
Edit Relay Name	Tap a relay and then tap the relay name to edit its name. And then tap to save the changes.
Select Alarm Output Type	Tap a relay and then select an alarm output type. Alarm Alarm outputs will be activated when the zone alarms. Arming Alarm outputs will be activated when the area (system) is armed. Disarming Alarm outputs will be activated when the area is disarmed. Manual Set the switch icon to ON in the relay list to manually activate alarm outputs of the relay. Zone Alarm outputs will be activated when the selected zone is triggered or tampered.
Set Delay Time for the Relay to Close	Tap a relay and then tap Output Delay to set the delay time for the relay to close. In other words, output delay refers to the duration of the alarm output.

Option

Description

Edit Relay Name

Tap a relay and then tap the relay name to edit its name. And then tap to save the changes.

Select Alarm Output Type

Tap a relay and then select an alarm output type.

Alarm: Alarm outputs will be activated when the zone alarms.
Arming: Alarm outputs will be activated when the area (system) is armed.
Disarming: Alarm outputs will be activated when the area is disarmed.
Manual: Set the switch icon to ON in the relay list to manually activate alarm outputs of the relay.
Zone: Alarm outputs will be activated when the selected zone is triggered or tampered.

Set Delay Time for the Relay to Close

Tap a relay and then tap Output Delay to set the delay time for the relay to close. In other words, output delay refers to the duration of the alarm output.