Set Wireless Siren Parameters

You can edit siren name and adjust siren's volume. And for a wired siren, you can also set siren type for it.

Make sure you have added wireless siren(s) to the security control panel. For details, see Add Device to Security Control Panel.

  1. On the device list page, tap the security control panel and then log in to the device to enter the Area page.
  2. Tap Peripheral Device and then tap a siren on the device list to enter the siren settings page.
  3. Perform the following operations.
    Option Description

    Edit Siren Name

    Tap the siren name to edit it, and then tap .

    Set Siren Volume

    Drag the slider to set the volume.

    Note:

    The function should be supported by the siren.

    Set Linked Event for Wired Siren

    • Alarm: The siren will be activated when the zones in the selected area(s) alarms.

      You can select an event sub-type (e.g, panic alarm) as the event that requires alarm output once it is detected within the zones.

    • Arming: The siren will be activated when the selected area(s) are armed.

    • Disarming: The siren will be activated when the selected area(s) are disarmed.

    • Manual Mapping: Set the switch icon to ON to manually activate the siren.

    • Zone: The siren will be activated when the selected zone(s) are triggered or tampered.

    Set Offline Duration

    If the time during which the siren loses communication with the security control panel exceeds the configured offline duration, the siren will be regarded as offline.