Set Keypad Parameters

You can set the keypad parameters, including device name, buzzer, card/tag swiping, backlight, and security settings, etc.

Make sure you have added wireless keypad to the security control panel.

  1. On the device list page, tap the security control panel and then log in to the device to enter the Area page.
  2. Tap Peripheral Device and then tap a wireless keypad on the device list.
  3. Set the parameters.
    Linked Area

    Set the area linked to the keypad. The linked area can be arm/disarm or clear alarm by the keypad.

    Buzzer

    Enable the buzzer.

    Card/Tag Swiping

    Enable swiping card/tag on the keypad to arm/disarm the linked area or clear alarms.

    Keypad

    Enable using keypad to arm/disarm the linked area or clear alarms.

    Backlight

    Enable the backlight of the keypad.

    Silent Panic Alarm

    If enabled, no linked alarm output (e.g., sound prompt) will be triggered when the device alarms.

    Offline Duration

    If the time during which the keypad loses communication with the security control panel exceeds the configured offline duration, the keypad will be regarded as offline.

    Security Settings
    Locked Duration

    Specify the duration that the keypad remains locked if the failed keypad password attempts reach the specified maximum times.

    Maximum Failed Attempts

    Specify the maximum failed attempts for entering the incorrect keypad password consecutively. If the failure times reaches the specified value, the keypad will remain locked for a specified duration.