Set Person Private Authentication Mode

In some situations, different persons need to use different authentication modes for accessing the same access point, and a person may need to use different authentication modes for accessing different access points. Setting the private authentication modes for different persons can provide an easy way for them to authenticate by less credentials or enhance the security of some important places by forcing them to use more credentials.

1. In the upper-left corner of the Home page, select > Passing Management > Access Control > Access Control Application > Authentication Mode.
2. Select the Private Authentication Mode tab.
3. Select a department from the left list.

   All persons in the department will be listed on the right panel.

4. Click in the Operation column to open the Authentication Device pane.
5. Click Add, check the device(s) from the list, and select the authentication mode from the drop-down list for the selected device(s).
6. Click OK to add the device(s) for authentication for the person.
7. Optional: Perform one of the following operations to edit the authentication mode(s) for the device(s).

   • Select an authentication mode from the Authentication Mode drop-down list to configure the authentication mode for each device.

   • Click Batch Configuration, select an authentication mode from the drop-down list, and click Save to configure the same authentication mode for all added devices.

8. Optional: In the Private Authentication Mode page, click in the Operation column, select the person(s), and click OK to copy the person's private authentication mode settings to another person or other persons.