Set Authentication via PIN Code

You can enable this function for allowing persons to access via PIN code.

On the top navigation bar, select > Basic Management > Person.

Then select Basic Configuration > Authentication via PIN Code on the left.

Switch on Person Authentication via PIN Code.

Note:

When enabled, if the authentication mode of the card readers at the access points is also set to Authenticate via PIN Code, all the added persons are allowed to use their PIN codes alone as the credential for access authentication.
When enabled, no duplicated PIN code is allowed.
You can set a PIN code for a person when setting basic information for the person. For details, see Add a Single Person.

Manual: The system administrator needs to manually filter out persons who have no PIN code or have duplicated PIN codes, change their PIN codes and then notify them of the updated PIN codes.

Note:
The system administrator needs to notify relevant persons of the updated PIN codes in time. Otherwise these persons' access authentication and attendance results will be affected.
Auto: The platform will automatically reset all persons' PIN codes and apply the reset PIN codes to the access control devices. The system administrator needs to notify all users of the updated PIN codes.

Click Save.