Configure Built-In Camera Parameters

Built-in camera is the camera built in the terminal. After adding a terminal to the platform, you should configure parameters for the built-in camera, such as device name, function, and face similarity.

Make sure at least one terminal is added to the platform, and make sure the terminal is online.

  1. On the top navigation bar, select > Basic Management > Device to enter the device management page.
  2. On the left navigation pane, click Device and Server > Digital Signage Terminal.
  3. Click on the Operation column to enter the device remote configuration page of terminal.
  4. In the Linked Device area, click Built-In Camera to enter the camera parameters settings page.
  5. Set the parameters.
    Device Name

    The device name of the built-in camera.

    Function

    In the drop-down list, select Attendance,Live View or Temperature Screening.

    Attendance

    The attendance function will be enabled, and the attendance data will be displayed in the attendance programs.

    Live View

    The live view of the camera will be displayed in the live view window of the normal programs.

    Temperature Screening

    Enable the temperature screening function of the camera. The real-time temperature screening is displayed on the temperature screening program.

    Similarity

    Set the face similarity. When the captured face picture's similarity reaches the value, it will be regarded as comparison succeeded.

    Recognition Distance

    It is used to control the recognition distance between the person and camera.

    Wearing Mask

    Select Yes or No from the drop-down list.

    Yes: The camera will recognize persons wearing masks.

    No: The camera will not recognize persons wearing masks.

    Temperature Measurement

    Check Temperature Measurement, then when the camera detects abnormal temperature, the corresponding prompt will be displayed on the terminal.

    Mask Detection

    Check Mask Detection, then when the camera detects people without masks, the corresponding prompt will be displayed on the terminal.

    Face Detection Frame

    Check Face Detection Frame, then when the camera detects a face, a frame will be displayed on the terminal.

    Quick Capture

    Check Quick Capture, then the camera can recognize and capture a face more frequently even if the face is far away.

  6. Click Save to save the above settings.