Add Under Vehicle Surveillance System

You can add Under Vehicle Surveillance System (UVSS) to the system by specifying the device IP address, port number and some other related parameters.

Make sure the devices you are going to use are correctly installed and connected to the network as specified by the manufacturers. Such initial configuration is required in order to be able to connect the devices to the system via network.

  1. On the top navigation bar, select > Basic Management > Device to enter the device management module.
  2. Select Device and Server > UVSS on the left navigation pane.
  3. Click Add to enter the Add Under Vehicle Surveillance System page.
  4. Set the required basic information such as device address, device port number, and device name.
  5. Optional: Switch on Add Resource to Area to import the resources of the added UVSS to an area.

    • Select Create Area by Device Name to create an area named after the UVSS for adding the resource(s) to the created area.

    • Select Existing Area, and select an existing area to add the resource(s) to.

    Note:

    • If you select Existing Area, you can also click Add to add a new area. For details, refer to Add an Area for Current Site.

    • If you do not import resources to area, you cannot perform the further configurations for the resources.

  6. Click Add to finish adding the UVSS, or click Add and Continue to continue adding another UVSS.
  7. Optional: Perform the following operations after adding UVSSs.
    Option Description

    Edit a UVSS

    In the Device Name column, click the name of a UVSS to edit it.

    Delete Device(s)

    Check one or multiple devices in the list, and click Delete to delete the selected devices.

    Search for Device

    Enter the keyword(s) in the search box and click to search for a specific device.

    Refresh Device Information

    In the Operation column, click to refresh a UVSS's information, or click Refresh All to refresh all the added UVSS' information.