Edit Online Device's Network Information

The online devices, which have IP addresses in the same local subnet with SYS server or Web Client, can be detected by HikCentral Professional. For the detected online devices, you can edit their network information as desired via HikCentral Professional remotely and conveniently. For example, you can change the device IP address due to the changes of the network.

For some devices, you should activate it before editing its network information. Refer to Create Password for Inactive Device(s) for details.

Perform this task when you need to edit the network information for the detected online devices.

  1. On the top, select Device.
  2. Select Device and Server on the left.
  3. Select the device type.
  4. In the Online Device area, select a network type.
    Server Network

    The detected online devices in the same local subnet with the SYS will be listed.

    Local Network

    The detected online devices in the same local subnet with the Web Client will be listed.

  5. View the device status, and click in the Operation column of an active device.
  6. Edit the device parameters, such as IP address, device port, HTTP port, subnet mask, and gateway.
    Note:

    • If you have switched on Used DHCP, you can only edit the device port No.

    • The parameters may vary for different device types.

  7. Click .
  8. Enter the device's password.
  9. Click Save.