Edit Security Radar for Current Site

After adding a security radar to an area of the current site, you can edit the security radar's name, view the drawn zones or trigger lines, and view the related calibrated cameras.

1. In the top left corner of the Home page, select > Basic Management > Device.
2. Click Area on the left.
3. In the area list panel, select the added current site from the drop-down site list to show its areas.
   Note:

   The icon indicates that the site is current site.

4. Optional: Select an area.
5. Select the Security Radar tab to show the added security radars.
6. Click a security radar's name in the Name column to enter the security radar editing page.
7. Edit the security radar's name.
8. Optional: In the Zone field, view the drawn zones of the security radar.
   Note:

   If there is no zone drawn for the security radar, you should go to the Map Settings module to draw. Refer to Draw Zone or Trigger Line for Radar for details.

9. Optional: In the Relate Calibrated Camera field, view the calibrated cameras related to the security radar.
   Note:

   If there is no calibrated camera related to the security radar, you should go to the Map Settings module to configure. Refer to Relate Calibrated Camera to Radar for details.

10. Click Save to save the settings for the security radar.