Edit Element for Remote Site

If the current system is a Central System with a Remote Site Management module, you can edit the cameras added from the Remote Site.

1. In the top-left corner of the Home page, select > Basic Management > Device.
2. Click Area on the left.
3. In the leftt panel, select the added Remote Site from the drop-down site list to show its areas.
   Note:

   The icon indicates that the site is a Remote Site.

4. Optional: Select an area to show its cameras.
5. Click a camera's name in the Name column to enter the camera editing page.
6. Edit the camera's basic information, including camera name and protocol type.
   Note:

   If you change the camera's name, you can click on the added camera list page to apply the new name to the device.

7. Optional: Click Live View to view the live view of the camera and hover over the window and click in the lower-right corner to switch to playback.
   Note:

   Double authentications is required for live view and playback on the camera editing page. For details about configuring double authentications, refer to System Security Settings.

8. Edit the recording settings of the camera.
   Note:

   For recording settings, if no recording settings have been configured for the camera, click Configuration on Site to set the parameters (for details, refer to Configure Recording for Cameras on Remote Site).

9. Optional: Click Configuration on Device in the top-right corner of the camera editing panel or click in the Operation column of the added camera list page to set the remote configurations of the corresponding device if needed.
   Note:

   For details about the remote configuration, refer to the user manual of the device.

10. Optional: Click Copy to to copy the current camera's specified configuration parameters to other cameras of the Remote Site.
11. Click Save.