Add Security Control Device by Device ID Segment

If you need to add multiple security control devices which have no fixed IP address and support ISUP to HikCentral, you can add them to HikCentral Professional at a time after configuring a device ID segment for the devices.

  • Make sure the security control device you are going to use are correctly installed and connected to the network as specified by the manufacturers. Such initial configuration is required in order to be able to connect the devices to the HikCentral Professional via network.

  • Make sure you have enabled the ISUP registration function on the security control device. For details, refer to the user manual of security control device.

  1. On the top navigation bar, go to > Basic Management > Device > Device and Server > Security Control Device.
  2. Click Add to enter the Add Security Control Device page.
  3. Select Hikvision ISUP Protocol as the Access Protocol.
    Note:

    To allow device registration via ISUP, you need to go to > Basic Management > System > Network > Device Access Protocol and switch on Allow ISUP Registration.

  4. Select Device ID Segment as the adding mode.
  5. Enter the required information, including the start device ID, the end device ID, and the ISUP login password.
  6. Optional: In the Picture Storage field, switch on Picture Storage, and select a storage location from the drop-down list.
  7. Optional: Set the time zone for the device.

    • Click Get Device's Time Zone.

    • Click Manually Set Time Zone and select a time zone from the drop-down list.

      Note:

      You can click View to view the details of the selected time zone.

  8. Optional: Switch on Add Resource to Area to import the resources (including alarm inputs and radars) of the added security control device to an area.
    Note:

    • System will generate security control partitions in the area, based on the settings on the device.

    • You can create a new area by the device name or select an existing area.

    • If you do not import resources to area, you cannot perform the further configurations for the resources.

  9. Finish adding the device.

    • Click Add to add the security control device and back to the security control device list page.

    • Click Add and Continue to save the settings and continue to add next security control device.

  10. Optional: Perform the following operations after adding the devices.
    Option Description

    Remote Configurations
    Click to set the remote configurations of the corresponding device.
    Note:

    For details about remote configuration, see the user manual of the device.

    Change Password

    Select the added device(s) and click to change the password for the device(s).

    Note:

    • You can only change the password for online HIKVISION devices currently.

    • If the devices have the same password, you can select multiple devices to change the password for them at the same time.

    Set Time Zone

    Select a device and click Time Zone to set its time zone.

    Search Device(s)

    Enter a keyword in the search box in the upper right corner of the page to quickly search the target device(s).

    Refresh Device List

    Click Refresh All to refresh the device list.