Add Security Radar to Area for Current Site

You can add security radars to different areas of the current site according to their locations, so that you will be informed when an alarm/event is triggered if you have configured an alarm/event.

1. In the top left corner of Home page, select > Basic Management > Device.
2. Click Area on the left.
3. In the left panel, select the added current site in the drop-down site list to show its areas.
   Note:

   The icon indicates that the site is current site.

4. Optional: Select an area for adding security radars to.
5. Select the Security Radar tab.
6. Click .
7. Select a security radar in the Security Radar field.
8. Optional: Select the area.
   Note:

   • You can click Add in the Area field to add new areas.

   • If you have not selected area in previous step, selecting area in this step will be required.

9. Click Add.

   The added security radar will be displayed in the list.

10. Optional: After adding the security radars, you can do one or more of the followings:

    Option	Description
    Arm/Disarm Security Radar	Select the security radar(s) and click / to arm/disarm the selected security radar(s). Note: An event will be triggered if any person or object enters an armed security radar's detection area.
    Move to Other Area	Select the security radars and click . Then select the target area to move the selected security radars to and click Move.
    Add Security Radar to Map	Click to enter the Map Settings page and drag the security radar to the map. See Add Hot Spot on Map for details.
    Display Security Radars of Sub Areas	Check Include Sub-Area to display the security radars of sub areas.
    Search for Security Radars	Enter the keywords in the Search field to search for security radars.