Add Fire Detector to Area for Current Site

You can add fire detectors to areas for the current site for management.

1. In the top-left corner of the Home page, select > Basic Management > Device.
2. Click Area on the left.
3. In the left panel, select the current site from the drop-down site list to show its areas.
   Note:

   The icon indicates that the site is the current site.

4. Optional: Select an area for adding fire detectors to.
5. Select the Fire Detector tab.
6. Click Add on the element page to enter the Add Fire Detector page.
7. Select the fire detector(s) to be added.
8. Optional: Select the area.
   Note:

   • You can click Add in the Area field to add new areas.

   • If you have not selected area in previous step, selecting area in this step will be required.

9. Click Add.

   The added fire detector(s) will be displayed in the list.

10. Optional: Perform the following operations.

    Option	Description
    Remote Configurations	Click in the operation column to configure the device remotely. Note: For details about remote configuration, see the user manual of the device.
    Move to Other Area	Select the fire detector(s) and click Move to Other Area. Then select the target area to move the selected fire detector(s) to and click Move.
    Set Geographic Location	Click Set Geographic Location to enter the Map Settings page. You can search for the fire detector(s) to be added to the map and drag the fire detectors to the map. For details, refer to Add Hot Spot on Map.
    Display Fire Detector of Sub Areas	Check Include Sub-Area to display the fire detectors in sub areas.
    Search Fire Detectors	Enter the name of fire detector(s) and click to search for the fire detector(s).
    Delete Fire Detector	Select the fire detector(s) and click Delete to delete the fire detector(s).