Batch Add Guidance Terminals by Port Segment

If the guidance terminals you want to add to the platform share the same IP address, user name, and password, but they are using different ports, you can add them by specifying the IP address, port range, user name, password, etc.

1. On the top navigation bar, select > Basic Management > Device to enter the device management module.
2. Select Device and Server > Guidance Terminal on the left navigation pane.
3. Click Add to open the Add Guidance Terminal page.
4. Set Adding Mode to Port Segment.
5. Edit the device connection and login information.

   Device Port

   Start port number and end port number of the devices.

   User Name

   User name of the administrator account created when activating the device, or the added non-admin account such as operator account.

   Note:

   Your access to certain features might be restricted when using a non-admin account to add the device to the platform.

   Password

   Password of the account that you are logging in.

   CAUTION:

   The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

   Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

6. Optional: Add the guidance terminal's related resource(s) to an area.
   1. In the Resource Information area, switch on Add Resource to Area.
   2. Select Create Area by Device Name or Existing Area.
      Note:

      If you select Create Area by Device Name, an area named after the guidance terminal will be created, and the resource(s) will be added to the area. If you select Existing Area, you need to select an existing area to add the resource(s) to, or you can click Add to add a new area. For details, refer to Add an Area for Current Site.

   3. Select None or a streaming server to get the stream for live view and playback.
      Note:

      After selecting a streaming server, its related camera(s) will be displayed, you can view their information and click the name of a camera to edit it. You can also check Wall Display via Streaming Server to get the stream from the streaming server when displaying live view or playback on the smart wall.

   4. Optional: Check Get Device's Recording Settings to get camera's recording settings configured on the guidance terminal.
7. Click Add to finish or click Add and Continue to add guidance terminals with another port segment.
8. Optional: Perform further operations after adding guidance terminals.

   Option	Description
   Edit Guidance Terminal	In the Device Name column, click the name of a guidance terminal to edit it.
   Configure Device Remotely	Click in the Operation column to enter the remote configuration page of a device.
   Refresh Device Information	In the Operation column, click to refresh a guidance terminal's information, or click Refresh All to refresh all the added guidance terminals' information.
   Change Password	Select a device and click Change Password to change the password of the device. Note: You can change the password for online HIKVISION devices only. If multiple devices have the same password, you can select these devices to batch change the password for them.