Add Visitor Terminals by IP Segment

When multiple visitor terminals to be added have the same port number, user name, password, and have different IP addresses within a range, you can add devices by specifying the IP segment and some other related parameters.

Make sure the devices you are going to use are correctly installed and connected to the network as specified by the manufacturers. Such initial configuration is required in order to be able to connect the devices to the HikCentral Professional via network.

  1. On the top left of the Web Client, click > Device > Device and Server > Visitor Terminal.
  2. Click Add.
  3. Select IP Segment as the adding mode.
  4. Enter the required information.
    Device Address

    Enter the start IP address and the end IP address where the devices are located.

    Device Port

    By default, the device port No. is 80.

    User Name

    The user name for administrator created when activating the device or the added non-admin users. When adding the device to HikCentral Professional using the non-admin user, your permissions may restrict your access to certain features.

    Password

    The password required to access the device.

    CAUTION:

    The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

    Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

  5. Optional: Set the time zone for the device.
    Get Device's Time Zone

    The time zone of the device will be automatically chosen according to the region of the device.

    Manually Set Time Zone (The settings will be applied to the device automatically)

    You can manually select a time zone of the device. The settings will be applied to the device automatically.

  6. Finish adding the device.

    • Click Add to add the devices of which the IP addresses are between the start IP address and end IP address and back to the device list page.

    • Click Add and Continue to save the settings and continue to add other encoding devices.

  7. Optional: Perform the following operations after adding the devices.
    Option Description

    Remote Configurations
    Click to set the remote configurations of the corresponding device.
    Note:

    For detailed operation steps about remote configuration, see the user manual of the device.

    Change Password
    Select the added device(s) and click to change the password for the device(s).
    Note:

    • You can only change the password for online HIKVISION devices currently.

    • If the devices have the same password, you can select multiple devices to change the password for them at the same time.

    Set Device's Time Zone

    In the device list, select one or multiple devices and click Time Zone to edit their time zones.

    Search for Devices

    Enter one or multiple key words in the search box and click to search for a specific device.

    Restore Default Settings

    Select the added device(s) and click Restore Default Settings to restore the configured device parameters excluding network parameters and account information.

    Note:

    If you want to restore all the device parameters, you should check Restore device parameters excluding network parameters and account information, such as user name and password. in the pop-up window.

    Refresh Device Information

    Select the added device and click to refresh information of the device.