Add Security Inspection Device by Device ID

For the security inspection devices supporting ISUP, you can add them by specifying the predefined device ID, ISUP login password, etc. This is an economic choice when you need to manage a security inspection device in the public network without a fixed IP address.

1. In the top left corner of Home page, select > Basic Management > Device.
2. Click Device and Server > Security Inspection Device.
3. Click Add to enter the Add Security Inspection Device page.
4. Select Security Inspection System, Analyzer or Walk-Through Metal Detector as the device type from the drop-down list.
5. Select Hikvision ISUP Protocol as the access protocol.
   Note:

   To allow device registration via ISUP, you need to go to > Basic Management > System > Network > Device Access Protocol and switch on Allow ISUP Registration.

6. Enter the required information, including device ID, ISUP login password, and device name.
   CAUTION:

   The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

   Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

7. Optional: Switch on Picture Storage and select a storage location from the drop-down list.

   Local Storage

   The pictures will be stored in the local storage space of the platform server.

   Hybrid Storage Area Network

   The pictures will be stored in the Hybrid Storage Area Network.

   Cluster Storage

   The pictures will be stored in the cluster storage server.

   pStor

   The pictures will be stored in the pStor, which is the storage access service for managing local HDDs and logical disks.

   Network Video Recorder

   The pictures will be stored in the network video recorder.

8. Optional: Set the time zone for the device.

   • Click Get Device's Time Zone.

   • Click Manually Set Time Zone and select a time zone from the drop-down list.

     Note:

     You can click View to view the details of the selected time zone.

9. Optional: Switch on Add Resource to Area to import the resources of the added security inspection device to an area.
   Note:

   • You can create a new area by the device name or select an existing area.

   • If you do not import resources to the area, you cannot perform further configurations for the resources.

10. Optional: If you choose to add resources to an area, select a streaming server to get the video stream.
    Note:

    You can check Wall Display via Streaming Server to get the stream via the selected Streaming Server when displaying live view on the smart wall.

11. Optional: Check Get Device's Recording Settings to get the recording schedule from the device.
12. Finish adding the device.

    • Click Add to save the settings and go back to the device list page.

    • Click Add and Continue to save the settings and continue to add another device.

13. Optional: Perform the following operations for the added devices.

    Option	Description
    Remote Configurations	Click to set the remote configurations of the device. Note: For details about the remote configurations, refer to the user manual of the device.
    Set Time Zone	Select the added device(s) and click Time Zone to set the time zone for the device(s).
    Search for Device	Enter a key word in the search box in the top right corner, and click (or press the Enter key) to search for the target device(s).