Set Health Check Frequency

The SYS will check the health of devices, resources, and servers managed on the platform. The platform will display the health check results in the Real-Time Overview module. You can set the frequency which controls how often the platform gets the latest status of the devices, servers, and resources.

On the top navigation bar, select > Basic Management > Maintenance.

Select Basic Configuration > Health Check Frequency on the left.

Device Health Status

You can set the health check frequency for different devices managed on the platform. It controls how often the platform pings these devices to determine whether they are online.

After disabled, the platform will not update the status of the managed devices. You need to refresh manually to get the latest status.

Note:

You should adjust the check frequency according to the number of devices. The greater the number of devices, the lower the frequency of health checks. When the frequency set is too high, you will be prompted and recommended to set a lower frequency.

Server Health Status

You can set the health check frequency for the managed recording servers and DeepinMind servers. It controls how often the platform pings these servers to determine whether they are online.

After disabled, the platform will not update the status of the managed servers. You need to refresh manually to get the latest status.

Others

  • Device Capability Set: Set how often the platform gets the managed devices' capabilities. After disabled, the platform will not update the capability changes of all the managed devices. You need to refresh manually to get the latest capabilities.

  • Recording Status: Set how often the platform checks the camera's recording status. After disabled, the platform will not update the cameras' recording status.

  • Alarm/Event Enabled or Not: Set how often the platform checks whether the event and alarm rules are enabled or not. After disabled, the platform will not update the configured event and alarm rule status.

  • Remote Alarm Enabled or Not: Set how often the platform checks whether the event and alarm rules configured on the Remote Sites are enabled or not. After disabled, the platform will not update the configured alarm rule status configured on the Remote Sites.