Send Heat Analysis Report Regularly

You can set a regular report rule for specified heat map cameras, and the platform can send an email with a report attached to the target recipients daily, weekly, or monthly, showing the heat map data (people dwell time at each location and number of people detected) during the specified time periods.

1. In the top left corner of the platform, select > Intelligent Analysis > Analysis Group > Scheduled Report.
2. Click Add or in the upper-left corner to open the Create Report page.
3. Create a name for the report.
4. Select Heat Analysis as the report category.
5. Select the language as Report Language.
   Note:

   By default, the language is the same with the selected language when you log in on the Web Client.

6. Select heat analysis type.

   Store Heat Analysis

   A heat analysis report based on the data from the store will be generated.

   Heat Analysis for One Camera

   Analyze people dwell time and number of people detected by the specified camera(s).

   Heat Analysis in One Region

   Analyze people dwell time and number of people detected by the cameras in the specified heat analysis group(s).

   Note:

   For details about adding heat analysis group, see Add Heat Analysis Group.

7. Select the stores, heat analysis camera(s) or groups contained in the report.
   Note:

   If you select Store Heat Analysis as the analysis type, you should select store(s). If you select Heat Analysis for One Camera as the analysis type, you should select camera(s). If you select Heat Analysis in One Region, you should select heat analysis group(s).

8. Set the dwell duration.
9. Set the Statistical Cycle as By Day, By Week, or By Month and set the sending time, and set how the report will present results analyzed in the specified time period.

   Daily Report

   Daily report shows data on a daily basis. The platform will send one report at the sending time every day, which contains analysis results on the day (24 hours) before the current day.

   For example, if you set the sending time as 20:00, the platform will send a report at 20:00 every day, containing analysis results between 00:00 and 24:00 before the current day.

   For example, if you select the report type as Daily, you can select Calculate by Hour or Calculate by Minute. There will be 24 or 24×60 records for each camera respectively in the report, showing the number of passing vehicles detected in each hour or each minute for one camera.

   Weekly Report and Monthly Report

   As compared to daily report, weekly report and monthly report can be less time-consuming, since they are not to be submitted every day. The platform will send one report at the sending time every week or every month, which contains analysis results on the last 7 days or last month before the sending date.

   For example, for weekly report, if you set the sending time as 6:00 on Monday, the platform will send a report at 6:00 in the morning on every Monday, containing analysis results between last Monday and Sunday.

10. Set the report time and sending time according to the report type.
11. Optional: Set the effective period (start time and end time) of sending the report regularly.
12. Optional: Switch on Send Report via Email, and select the email template from the drop-down list to define the recipient information and email format.
    Note:

    You can click Add to add a new email template. For setting the email template, refer to Add Email Template for Sending Report Regularly.

13. Optional: Switch on Upload to SFTP, and click Configure beside SFTP Address to configure the SFTP settings, including SFTP address, port, user name, password, and saving path.
    Note:

    You can also hover the cursor on , then click SFTP Settings from the drop-down list to enter the panel to configure the corresponding information.

14. Optional: Switch on Local Storage, and click Configure beside Saving Path to configure the saving path of local storage.
    Note:

    You can also hover the cursor on , then click Configure Local Storage from the drop-down list to enter the panel to configure the corresponding information.

15. Click Add.
16. Optional: Click Export to export the report of this schedule for verifying the report sending schedule settings.